Your bag is empty

Have you seen what's new?

metal tin tile guide 2019

Metal Tin Tile Guide

We are very excited to be one of the only UK stockists for amazing real Metal Tin Tiles! Read our guide of handy pointers to help you install, paint and seal them.

The Filigree Tin Tile - silver tin tile traditional design

The Filigree Tin Tile | Click To Shop


Our metal tin tiles are manufactured from 29 gauge tin-plated steel and are sold without any fixings but can be easily installed with glue or nails. The tiles will need to be sealed and must be kept in a dry environment until you are ready to finish and install them. There are two ways of fixing the tiles to your chosen surface; Gluing or Nailing. We recommend taking both steps to ensure the tiles are fixed as securely possible. The Tin Tiles are suitable for use on ceilings, walls, as backsplashes, on kitchen islands, in fireplaces, on cupboards or doors, and as unique headboards!

The Tudor Rose & Chaplet Tin Tile | Click To Shop

The tiles can be cut using tin snips or foot shears if required. Please be aware that edges are extremely sharp, so we recommend wearing safety gloves at all times when handling, altering or cutting your tin tiles. The tiles are moderately heat resistant with a melting point of the tin coating at around 450°F / 230°C and the melting point of the steel base at around 2400°F / 1315°C. They are suitable for use behind stoves but please be sure to seal the tin with a flame-resistant product that is suitable for metal surfaces.

The Five Point Star Tin Tile

The Five Point Star Tin Tile | Click To Shop

Installing your Metal Tin Tiles

The Filigree Tin Tile

The Filigree Tin Tile | Click To Shop

Using Glue:
If you are fixing the tiles directly to a substrate surface that will not hold nails or screws well (i.e. drywall/plasterboard) please be sure to use a construction-strength adhesive for more secure fixing. Brad nails, small screws or staples can be used to tack and hold the tin in place while the glue is setting. Once the tiles are installed with glue we would recommend using additional fasteners for a more secure hold. We can recommend PU Adhesive and No Nails glue and advise that you avoid the use of contact cement as they dry instantly and do not allow you to adjust the alignment of the tile.

Using Nails:
You can also secure the tiles by placing a nail in each corner. We highly recommend that you nail, screw or staple your tin ceiling to 1/4" plywood or wood strapping to achieve a safer and more secure hold. Brad nails, small screws, and tacks are suitable for fixing the tin tiles to your surface, but always check the manufacturer for recommendations on using with wood or masonry. If using as ceiling tiles we recommend that you use both glue and nails to attach the tiles to the ceiling.


The Art Deco Design Tin Tile | Click To Shop

Painting your Metal Tin Tiles

The Floral Tin Tile | Click To Shop

Once the tiles are in place and free from dirt, dust, and oil; use paintable decorators caulk to fill in any seams or corner cuts. Prime and then paint the tiles using your desired finish, which can be applied by brush, roller or spray. If you are painting your tiles before installing them; we recommend doing at least one coat after installation to make sure you get an even finish. Always apply a final seal coat to your tiles to prolong the finish. Recommended paints: oil based, spray, latex or metal. For an antiqued finish, we recommend using a clear matt varnish mixed with a drop of dark paint. Paint the mix onto the tiles using a brush, and distress the paint using a sponge which will provide a tarnished/aged look.

Top Tip: Always test your painted finish on the back of a spare panel or a cut-off piece first.

Applying a Clear Coat / Sealing your Tin Tiles:
The Tin Tiles look great naked, so if you want to keep them as they are, all you need to do is seal them with a clear sealer or dead flat varnish to protect them from moisture. This is particularly important when using the tiles in areas exposed to moisture, such as Backsplashes, Bathrooms, and Kitchens. To do this, simply make sure the tiles are clean from dirt, dust, and oil by wiping down with Methyl Hydrate or Denatured Alcohol and apply your clear coat sealant by brush, roller or spray.

 always test the cleaning and sealing products on the back of a panel or on a scrap piece first. You can apply the clear coat either before or after the installation and will need clear decorators caulk to fill in any seams or corner cuts, which can be covered with metallic paint afterwards if required. Clear sealant sprays are available at most hardware stores in both matt and satin finishes which are a great quick and easy alternative to seal the tiles.

Want to see some more real Tin Tile inspiration? See our Get The Look post for more examples of how these fabulous tiles are used in homes, bars, and restaurants across the world.


If you have any questions about our collection of tin tiles or would like to ask us about any of the paint effects in this post, feel free to contact us.

Telephone: 01444 253391
(We're open Monday to Friday 9:00 am - 5:00 pm)

Shop Metal Tin Tiles

If you enjoyed this blog, you may also like...

Beautiful yellow throw on a bed styled with a pink star cushion.

The Love Edit: The Art of Taking Care of Yourself and Your Home

Discover the alternative self-care guide to show a little love to your yourself, your home, and your partner for Valentine's Day 2024.

Read more
The book cover of The Home Style Handbook by Lucy Gough

10 Mins With: Lucy Gough

An interview with renowned Interior Stylist and Art Director, Lucy Gough in celebration of her new book, The Home Style Handbook.

Read more