When choosing the ideal place for your wall sticker, we advise that you place the design against the wall to get a feel for the height and spacing.
The Wall Stickers are best used on plain wallpaper or smooth clean painted walls. They will highlight any cracks or imperfections on the wall, so they are best used on un-textured surfaces. They can also be used on glass or furniture (if a varnish is applied over the top). We strongly advise that you allow freshly painted walls to dry for at least 4 weeks before applying your wallsticker.
Before application, ensure that the surface is clean of grease and completely dry.
For wall stickers featuring text, it is a good idea to measure and check that the stickers are straight. We suggest using a spirit-level and marking the wall with pencil so that you can line the sticker up when attaching it to the wall.
The Wall stickers are positioned between two films. One thicker papery film, and one clear film. The papery white film is just a backing to protect the sticker until it is ready for use. Lay the sticker on a table, with the white film on the bottom, and the clear film facing up.
Begin from a straight edge on the sticker, either the left or the right. Rub firmly around the edge of where the actual stickers begin to ensure that they have stuck to the clear surface film. Gently begin to peel away the clear film from the papery white film. The stickers do tend to stick to the white backing film, so you will need a little patience to ensure that they stick to the clear film. Continue slowly peeling the sticky film, along with the stickers attached to it away from the white film.
You should be left with the white film with no stickers, and the sticky clear film, sticky side up, with the sticker’s also sticky side up.
Now place the clear film with the stickers attached in the correct position on the wall. Rub the surface firmly all over the areas that are the actual sticker. Remove any air bubbles by starting at the middle and moving to the outside edges. Any bubbles between the clear film and the sticker will not be a problem, as this is air caught between the film and the sticker and not the sticker and the wall.
Now repeat the above process, only now slowly peel the clear film away. Again, this will need some patience to ensure that the stickers stay attached to the wall and the clear film peels away. We have found that the best way to do this is firmly hold one hand over the film and sticker, moving it slowly along the surface as you peel back the clear film with your other hand.
If you have any problems, or are still concerned, please do not hesitate in calling us for help.
Remember the stickers will brighten up your space and make you smile.
Finally sit back relax and let the complements roll in and enjoy…
Rockett St George
If you need any further help please do get in touch, Please note that some of the wall stickers are made to order and are therefore non-refundable.